Com-Power ACS-230-25W Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Com-Power ACS-230-25W. Com-Power ACS-230-25W 15 stron.

In normal condition following message will be displayed

NOTE: Prior to turning the Front panel power switch ON, Please ensure that the RF

output of the RF signal source connected to the Amplifier input is turned off or below -45dBm.

When the unit turns on the ACS-230-50W system starts a self test. ACS-230-50W system

does not allow to have any RF input signal greater than -45dBm. If any RF input signal

is present before completion of self test the unit will automatically turn off and the

following message will be displayed until RF input is reduced below -45dBm or Turned

Off.

Page 11 of 15

MANUAL_ACS-230-25W Rev. M02.15

Distributed by: Reliant EMC LLC, +1 408 916‐5750, [email protected], www.reliantemc.com