Baumer HS35 Series Instrukcja instalacji i obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Konwerter mediów Baumer HS35 Series. Baumer HS35 Series 44 stron.

General safety instructions

3.1

Hair and clothes may become tangled in rotating shafts. Take care that the equip-

ment cannot start uncheckedly during the assembly work.

• Before all work switch off all operating voltages and ensure machinery is stationa-

ry.

• Secure machines of restarting.

3.2

• Never restrict the freedom of movement of the encoder. The installation instruc-

tions must be followed.

• It is essential that the specified clearances and/or angles are observed.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

• It is imperative to observe the specifications of the „Technical data".

3.3

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the

sensing system.

• The encoder keeping away from mechanical vibrations, which are above the

specifications of the data sheet (don't throw or drop the encoder).

3.4

Adhesive fluids can damage the optical sensing system and the bearings of the

encoder. Dismounting an encoder, secured to a shaft by adhesive may lead to the

destruction of the unit.

3.5

Dirt penetrating inside the encoder can cause short circuits and damage the optical

sensing system.

• Absolute cleanliness must be maintained when carrying out any work on the elec-

trical connection.

• The encoder, in particular seals and connecting cables, may not come into contact

with corrosive liquids or be painted.

• When mounting/demounting, never allow oil, grease or other liquids to penetrate

the inside of the encoder.

Baumer_HS35_II_DE-EN_1706.indd

General safety instructions

 9