Douglas F5 FIXED Series Instrukcja montażu i instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja montażu i instrukcja obsługi dla Sport i rekreacja Douglas F5 FIXED Series. Douglas F5 FIXED Series 8 stron. Fixed height basketball system
Również dla Douglas F5 FIXED Series: Instrukcja montażu (6 strony)

Drukuj stronę

One, free easy call gets your utility lines marked

AND helps protect you from injury and expense

NOTE: At rim height 10' , distance from the face of backboard to the

front of Main Post(A) is 48", Choose the proper location to dig

for the concrete footing:

STEP A

a. Dig a hole 48" deep and 20"x 20"square . The edge of the hole

should be flush with the edge of the playing surface. If you live in an area

where heavy frost can occur, it may pose a problem, consult your local

building inspector to determine the appropriate hole depth.

NOTE: The hole must be at least 48" deep.

b. Build a form before pouring the concrete pad, to ensure that the top

of the concrete remains straight and square. The form should

be placed about 1/2" above the playing surface to allow for water drainage.

c. Bell out the bottom of the hole.

NOTE: A square hole prevents the rotation of the concrete.

NOTE: The area behind the playing surface must be cleared off by at least

3 feet to enable the user to stand behind the pole to adjust the Rim height.

STEP B

A. Thread a 16mm Hex Nut (U4) onto each of the 16mm J-Bolts

(U2).Securely tighten the Nuts all the way down to the end of the

threads.

B. Slide the threaded end of the J-Bolts through the holes

in the Anchor Template (U1) and secure each J-Bolt with a

16mm J-Bolt Hex Nuts(U4) as shown. Securely tighten all Nuts

at this time.

NOTE: Make sure the curved"J"ends of the J-Bolts are

oriented in a rectangular pattern, as shown.

Utility Markings

Color

De nition

Red

Electric

Yellow

Gas, Oil, Petroleum

Orange

Communication, Phone, TV

Blue

Portable Water, Irrigation

Green/Brown

Sewer

White

Proposed Dig

20"

20"SQ

48"