Baumer HUBNER BERLIN HOG 10 Instrukcja instalacji i obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Konwerter mediów Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 stron. Incremental encoder with connecting cable ölfle
Również dla Baumer HUBNER BERLIN HOG 10: Instrukcja instalacji i obsługi (36 strony), Instrukcja instalacji i obsługi (40 strony), Instrukcja montażu i obsługi (40 strony), Instrukcja montażu i obsługi (40 strony), Instrukcja montażu i obsługi (40 strony), Instrukcja montażu i obsługi (32 strony), Instrukcja montażu i obsługi (36 strony), Instrukcja montażu i obsługi (36 strony), Instrukcja montażu i obsługi (28 strony)

Baumer HUBNER BERLIN HOG 10 Instrukcja instalacji i obsługi
3

Security indications

3.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all operating voltages and ensure machinery is stationary.
3.2
Risk of destruction due to electrostatic charge
Electronic parts contained in the encoder are sensitive to high voltages.
• Do not touch plug contacts or electronic components.
• Protect output terminals against external voltages.
• Do not exceed max. operating voltage.
3.3
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the encoder.
The installation instructions must be followed.
• It is essential that the specified clearances and/or angles are observed.
3.4
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the optical sensing
system.
• Never use force. Assembly is simple when correct procedure is followed.
• Use suitable puller for disassembly.
3.5
Risk of destruction due to contamination
Dirt penetrating inside the encoder can cause short circuits and damage the optical sensing
system.
• Absolute cleanliness must be maintained when carrying out any work on the open terminal box.
• When dismantling, never allow lubricants to penetrate the encoder.
3.6
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the optical sensing system and the bearings. Dismounting an en-
coder, secured to a shaft by adhesive may lead to the destruction of the unit.
3.7
Explosion risk
Do not use the encoder in areas with explosive and/or highly inflammable materials. They may
explode and/or catch fire by possible spark formation.
MB097.3 - 11070460
Baumer_HMG11-HOG10_II_DE-EN (16A2)
Security indications
3
6