Asus WL500GD Podręcznik użytkownika - Strona 43

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Router sieciowy Asus WL500GD. Asus WL500GD 43 stron. For 802.11g/b wireless clients

Chapter 3 - Software Configuration

Wireless (Cont.)

Basic Rate Set (WL500g/WL500g Deluxe) - This field indicates the basic

rates that wireless clients must support. Use "1 & 2 Mbps" only when

backward compatibility is needed for some older wireless LAN cards with

a maximum bit rate of 2Mbps.

Fragmentation Threshold (256-2346) – Fragmentation is used to divide

802.11 frames into smaller pieces (fragments) that are sent separately to

the destination. Enable fragmentation by setting a specific packet size

threshold. If there is an excessive number of collisions on the WLAN,

experiment with different fragmentation values to increase the reliability

of frame transmissions. The default value (2346) is recommended for normal

use.

RTS Threshold (0-2347) – The RTS/CTS (Request to Send/Clear to Send)

function is used to minimize collisions among wireless stations. When

RTS/CTS is enabled, the router refrains from sending a data frame until

another RTS/CTS handshake is completed. Enable RTS/CTS by setting a

specific packet size threshold. The default value (2347) is recommended.

DTIM Interval (1-255) (WL500g/WL500g Deluxe) – DTIM (Delivery

Traffic Indication Message) is a wireless message used to inform clients in

Power Saving Mode when the system should wake up to receive broadcast

and multicast messages. Type the time interval in which the system will

broadcast a DTIM for clients in Power Saving Mode. The default value (3)

is recommended.

Beacon Interval (1-65535) – This field indicates the time interval in

milliseconds that a system broadcast packet, or beacon, is sent to synchronize

the wireless network. The default value (100 milliseconds) is recommended.

Enable Frame Bursting? (WL500g/WL500g Deluxe) – This field allows

you to enable frame-bursting mode to improve performance with wireless

clients that also support frame-bursting.

Enable Radio? (WL500g/WL500g Deluxe) - Selecting "Yes" enables the

wireless function during user-defined dates and times. Wireless users will

not be able to connect on non-selected dates and times.

Date to Enable Radio (WL500g/WL500g Deluxe) - This field defines

the dates that the wireless function will be enabled.

Time to Enable Radio (WL500g/WL500g Deluxe) - This field defines

the time range that the wireless function will be enabled on each of the

selected dates.

ASUS Wireless Router