Baumer Hubner EtherNet/IP HMG10 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Baumer Hubner EtherNet/IP HMG10. Baumer Hubner EtherNet/IP HMG10 44 stron.
Drukuj stronę
5
|
Installation
5
Installation
NOTICE
Equipment damage due to mechanical shock
Strong vibration may lead to overload by constraining force.
a) Never apply force. If properly assembled, everything fits smoothly together.
b) Use only suitable tools for disassembly (see chapter on disassembly).
NOTICE
Equipment damage by adhering liquids
Sticky liquids may damage sensing unit and ball bearings. Disassembling a device which is
stuck to the axis can lead to destruction.
a) Do not use adhesive liquids to fasten the device.
5.1
Positioning the support plate
1
Torx screw M4x10 mm, TX20, ISO 14583 2
Tool
20 mm
n
12
1
2
Operating Manual
Torque plate 360°, attachable in any posi-
tion
HMG10 & HMG10P EtherNet/IP | V1, T1
Baumer Hübner