Baumer Hubner EtherNet/IP HMG10 Instrukcja obsługi - Strona 35
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Baumer Hubner EtherNet/IP HMG10. Baumer Hubner EtherNet/IP HMG10 44 stron.
Drukuj stronę
Baumer Hübner
7.1
Removing the encoder from blind hollow shafts or cone shafts
DANGER
Burns caused by heat
The device heats up at high torque. There is a risk of getting burned after use.
a) Avoid overheating the device.
b) Wear suitable gloves.
7.1.1
Loosen fastening aids provided at the blind hollow shaft
5
1
Blind hollow shaft or cone shaft with
wrench flat SW 17 mm
3
Cover
5
Grounding strap
7
Cheese-head screw M6x8 mm for
grounding strap (ISO 1207)
9
Threaded rod M6, variable length ≤ 210
mm
11 Self-locking nut M6 (ISO 10511)
V1, T1 | HMG10 & HMG10P EtherNet/IP
6
7
8
1
9
10
11
2
Cheese-head screw M6x30 mm (ISO
4762)
4
Torx/slotted head screw M4x10 mm (DIN
7964)
6
Washer B6.4 for grounding strap (ISO
7090)
8
Torque arm
10 Washer B6.4 (ISO 7090)
Operating Manual
Disassembly
2
3
4
|
7
35