Douglas Dynamics WESTERN MVP PLUS 44595-1 Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Douglas Dynamics WESTERN MVP PLUS 44595-1. Douglas Dynamics WESTERN MVP PLUS 44595-1 15 stron. Snowplow

Drukuj stronę

T‑FRAME TO BLADE ASSEMBLY

1. Align the hinges of each wing. Position the

T‑frame assembly between the blade wings so

that the holes in the T‑frame are aligned with the

holes in wing hinges.

2. Insert the pivot pin from top to bottom through all

hinges as shown.

3. Move the snowplow into a normal operating

position.

Lit. No. 43174, Rev. 04

INSTALLATION INSTRUCTIONS

Pivot Pin

4. Remove the protective packaging from the angle

rams.

5. Align the holes in the rod end of the angle ram

with the corresponding holes on the back of the

blade.

6. Install a 1" x 4‑3/4" clevis pin from the top down

to attach each rod. Secure the clevis pins with

1/4" x 1‑1/2" cotter pins.

1" x 4-3/4" Clevis Pins

1/4" x 1-1/2" Cotter Pins

July 15, 2020