Baumer PMG10P Instrukcja montażu i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Konwerter mediów Baumer PMG10P. Baumer PMG10P 32 stron. Absolute encoder
Również dla Baumer PMG10P: Instrukcja montażu i obsługi (32 strony), Instrukcja montażu i obsługi (36 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (36 strony)

Baumer PMG10P Instrukcja montażu i obsługi
2.2
Attention instructions for mounting and operation
)
Risk of destruction due to electrostatic charge
Electronic parts contained in the device are sensitive to high voltages�
» Do not touch plug contacts or electronic components�
» Protect output terminals against external voltages�
» Do not exceed maximum voltage supply�
)
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces�
» Never restrict the freedom of movement of the device� The mounting instructions
must be followed�
» It is essential that the specified clearances and/or angles are observed.
)
Risk of destruction due to mechanical shock
Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the
sensing system�
» Never use force� Mounting is simple when correct procedure is followed�
» Use suitable puller for dismounting�
)
Risk of destruction due to contamination
Dirt penetrating inside the device can cause short circuits and damage the sensing
system�
» Absolute cleanliness must be maintained when carrying out any work on the
device�
» Never allow lubricants to penetrate the device�
)
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the sensing system and the ball bearings. Dismounting
a device, secured to a shaft by adhesive may lead to the destruction of the device�
» Do not use adhesive fluids for fixing.
MB261EN - 11196414, 21A1, Baumer_PMG10-Inc_EN_202103_MI_11196414
SAFETy AND ATTENTION INSTRUCTIONS
7/32