Douglas Dynamics SnowEx Automatixx SPEEDWING 77840 Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odśnieżarka Douglas Dynamics SnowEx Automatixx SPEEDWING 77840. Douglas Dynamics SnowEx Automatixx SPEEDWING 77840 17 stron.
Drukuj stronę
A-FRAME TO HEADGEAR
1. Position the A-frame between the headgear strut
and inner ear, aligning the appropriate hole in the
A-frame that is determined by distance "d."
2. On each side, insert 1" x 4-3/4" clevis pins (from
the shipping bracket) from the outside of the
headgear through the correct A-frame holes.
Secure the clevis pins with 1" fl at washers and
1/4" x 1-1/2" cotter pins found in the parts bag.
1" x 4-3/4"
Clevis Pin
Lit. No. 52308, Rev. 06
INSTALLATION INSTRUCTIONS
Stand Actuator Pin
3. Fold the headgear forward and pin the lift cylinder
to the A-frame using a 2-1/8" x 1/2" clevis pin and
1-1/2" x 5/32" cotter pin from the parts bag.
4. Verify that the stand actuator pin is on top of the
stand.
Stand
6
1/4" x 1-1/2"
Cotter Pin
1" Flat Washer
May 1, 2021