Baumer CleverLevel LBFH/I Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Baumer CleverLevel LBFH/I. Baumer CleverLevel LBFH/I 48 stron. Point level detection – hygienic/industrial level measurement
Drukuj stronę
CleverLevel
Point level detection – hygienic/industrial
3.
Symbols in warning signs
Symbol
Warning term
DANGER
WARNING
CAUTION
ATTENTION
4.
Transport and storage
Check packaging and sensor for damage.
f
In the event of damage: Do not use sensor.
f
5.
Assembly
1
4
Fig. 3. Mounting options
4 / 48
Level measurement
LBFH/I
®
Explanation
In situations which cause death or serious injuries.
In situations which can cause death or serious injuries.
In situations which can cause light or medium injuries.
For material damage
2
3
4
4
Operating Instructions
Store sensor where it will be secure against
f
shock.
Storage temperature: -40 ... +85 °C
Relative humidity: < 98 %
1
Overfill protection
2
Limit level, max.
3
Limit level, min.
4
Run-dry protection
The sensor can be mounted on any point in the
vessel.
A sensor mounted at the top of the vessel (1)
ensures against overfilling. Sensors attached
further down detect a maximum (2) or minimum (3)
limit level. A sensor attached at the bottom or on
the outfeed pipe (4) can protect a connected pump
against dry running.
If the sensor is mounted in a pipe, it is
recommended to use window trigger as the trigger
function. The adaptive trigger can have limited
functionality if it is mounted in a pipe.
www.baumer.com