Baumer CleverLevel PL20H/S Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Baumer CleverLevel PL20H/S. Baumer CleverLevel PL20H/S 44 stron. Level measurement adaptive trigger – hygienic/industrial
Drukuj stronę
CleverLevel
Adaptive trigger – hygienic/industrial
3.
Symbols in warning signs
Symbol
Warning term
DANGER
WARNING
CAUTION
ATTENTION
4.
Transport and storage
ATTENTION
Unintended change of measurement characteristics
Correct gas and dust protection can only be achieved by meeting their installation requirements.
Handle the sensor with care.
f
Check packaging and sensor for damage.
f
In the event of damage: Do not use sensor.
f
5.
Assembly
1
4
Fig. 3. Mounting options
4 / 44
Level measurement
®
PL20H/S
Explanation
In situations which cause death or serious injuries.
In situations which can cause death or serious injuries.
In situations which can cause light or medium injuries.
For material damage
2
3
4
4
Operating Instructions
Store sensor where it will be secure against
f
shock.
Storage temperature: -40 ... +85 °C
Relative humidity: < 98 %
1
Overfill protection
2
Limit level, max.
3
Limit level, min.
4
Run-dry protection
The sensor can be mounted on any point in the
vessel.
A sensor mounted at the top of the vessel (1)
ensures against overfilling. Sensors attached
further down detect a maximum (2) or minimum (3)
limit level. A sensor attached at the bottom or on
the outfeed pipe (4) can protect a connected pump
against dry running.
If the sensor is mounted in a pipe, it is
recommended to use window trigger as the trigger
function. The adaptive trigger can have limited
functionality if it is mounted in a pipe.
www.baumer.com