Baumer PAC50S Instrukcja obsługi - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Baumer PAC50S. Baumer PAC50S 44 stron.
Drukuj stronę
10
|
Description Display
Temp. compensation
Damping, Cond. in
Damping, Temp. in
10.4.3
Submenu
Menu
Output setup
Submenu
Conductivity
Concentration
Temperature
Default Iout source
Output current limits
Error output
Damping, 4-20mA out
Fixed output current
30
Temperature compensation:
n
▪ Setting and parameterization of the temperature compensa-
Damping parameter for conductivity:
n
▪ Input of damping parameter for conductivity.
Damping value for temperature:
n
▪ Input of damping parameter for temperature.
Output setup
Conductivity
Concentration
Temperature
Default Iout source
Output current limits
Error output
Damping, 4-20mA out
Fixed output current
Output setup
is for parameterization of the sensor outputs.
Conductivity:
n
▪ Setting the conductivity values.
Concentration:
n
▪ Setting the concentration values.
Temperature:
n
▪ Setting the temperature values.
Iout source:
n
▪ Setting the standard Iout source (conductivity, concentration
Limit output:
n
▪ Setting of the output max and min current limit.
Error indication:
n
▪ Set the current parameters at which an error is indicated.
Damping of 4-20mA current output:
n
▪ Settings of linear damping at the 4-20mA current output.
Correction value:
n
▪ Enter tolerance value for error indication.
Operating Manual
tion.
Selection range 1
Selection range 2
Selection range 1
Selection range 2
Temp. at 4mA
Temp. at 20mA
Cond. / Conc.
Temperature
Lower current limit
Upper current limit
Error output current
Value [sec]
Value [mA] (0 = disable)
or temperature).
Cond. at 4mA
Value [mS/cm]
Cond. at 20mA
Value [mS/cm]
See "Selection range 1"
Conc. at 4mA
Conc. at 20mA
See "Selection range 1"
Value [°C / F]
Value [°C / F]
Value [mA]
Value [mA]
Value [mA]
PAC50H/S | V1
Baumer
Value [%]
Value [%]