Advance Welding AW315 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Advance Welding AW315. Advance Welding AW315 15 stron.

AW315

AW315 - Operator Manual

Safety Notes

• RISK OF EXPLOSION! This welding unit must not be used in a gaseous

atmosphere.

• RISK OF ELECTRIC SHOCK! Do not open. No user serviceable parts

inside.

• Before using, always visually inspect the unit to see that the cables and

connectors are not worn or damaged. Replace the damaged part before

welding.

• Switch off and remove the plug from the mains before adjusting, cleaning, or

if the cables are entangled and before leaving the equipment unattended for

any period.

• To avoid damaging the unit, do not interrupt the supply voltage or disconnect

the welding cable, while the unit is welding a fitting.

• Do not lift or pull the equipment by its cables.

• Do not disconnect the welding cables by pulling on them, always pull off the

connectors from the fitting.

• Do not start a weld without the pipe correctly inserted into the fitting.

• Do not touch the fitting while welding.

• Do not weld in the rain or leave the equipment outdoors whilst it is raining.

• Weld only in daylight or in good artificial light.

• The operator is responsible for accidents or hazards occurring to other people

or their property while using this equipment. Keep the work area safe!

• Keep bystanders a safe distance away from the machine while welding.

• Never allow people unfamiliar with these instructions to use the welding unit.