Baumer Hubner Berlin TDP0,2LTLS-10 Instrukcja montażu i obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Przenośny generator Baumer Hubner Berlin TDP0,2LTLS-10. Baumer Hubner Berlin TDP0,2LTLS-10 32 stron. Combination tachogenerator (twin tachogenerator) with integrated centrifugal switch
Drukuj stronę
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The combination TDP 0,2 (TDPZ 0,2) + ESL is a generator-based working precision rotary
measurement device and a mechanically operated switching device which must be handled
with care by skilled personnel only.
1.3
The constructive design of the centrifugal switch is its use as a switch with positive break func-
tion. It must not be used as a continuous switch (switching cycles greater than 500 during
service life).
1.4
The expected service life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.5
The expected service life of carbon brushes depends on the electrical current and is usually
consistent with the service life of the ball bearings. Replacement of the carbon brushes is only a
recommended precaution.
1.6
The storage temperature range of the device is between -15 °C and +70 °C.
1.7
The operating temperature range of the device is between -30 °C and +130 °C,
measured at the housing.
1.8
EU Declaration of Conformity meeting to the European Directives.
1.9
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.10
The device may be only opened as described in this instruction. Repair or maintenance work
that requires opening the combination completely must be carried out by the manufacturer.
Alterations of the device are not permitted.
1.11
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.12
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
MB079.1 - 11115288
on the device invalidates warranty.
Baumer_TDP02-FSL-TDPZ02-FSL_II_DE-EN (19A3)
1
General notes
2