Asus AP2300 Podręcznik referencyjny sprzętu - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik referencyjny sprzętu dla Serwer Asus AP2300. Asus AP2300 44 stron. Dual pentium iii server platform

• 1-5 Electrical Safety

IMPORTANT

• Before installing or removing signal cables, ensure that the

power cables for the system unit and all attached devices are

unplugged.

• To prevent electrical shock hazard, disconnect the power cable

from the electrical outlet before relocating the system.

• When adding or removing any additional devices to or from

the system, ensure that the power cables for those devices are

unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before

you add a device.

• Use one hand, when possible, to connect or disconnect signal

cables to prevent a possible shock from touching two sur-

faces with different electrical potentials.

CAUTION

This product is equipped with a three-wire power cable and plug

for the user's safety. Use the power cable in conjunction with a

properly grounded electrical outlet to avoid electrical shock.

IMPORTANT

Motherboards, adapters, and disk drives are sensitive to static

electricity discharge. These devices are wrapped in antistatic

bags to prevent this damage. Take the following precautions:

• If you have an antistatic wrist strap available, use it while

handling the device.

• Do not remove the device from the antistatic bag until you

are ready to install the device in the system unit.

• With the device still in its antistatic bag, touch it to a metal

frame of the system.

• Grasp cards and boards by the edges. Hold drives by the

frame. Avoid touching the solder joints or pins.

• If you need to lay the device down while it is out of the

antistatic bag, lay it on the antistatic bag. Before picking it

up again, touch the antistatic bag and the metal frame of the

system unit at the same time.

• Handle the devices carefully in order to prevent permanent

damage.

AP2300 Hardware Reference Guide

1. Introduction