Amphenol APC Series Instalacja produktu - Strona 5
Przeglądaj online lub pobierz pdf Instalacja produktu dla Kable i złącza Amphenol APC Series. Amphenol APC Series 13 stron.
Drukuj stronę
2:
Product assembly
Step 1:
Stripping wire
As shown in Figure 1 and Table 1, strip the wire, and ensure that the cut surface of the insulation layer is smooth,
the wire is not damaged, and the cut surface of the wire is flush.
Step 2:
Crimping contacts
Use the automatic crimp tool or manual crimp tool to crimp the terminal. The crimp width and height diameter of the
terminal on the insulation layer shall not be larger than the aperture of the connector shell, as shown in Figure 2.
(18-4 hole diameter 5.7mm, 18-11 hole diameter 4.5mm, 18-16 hole diameter 3.35mm)
Table 1
Contact size
10
12
16
Figure 1
Figure 2
A
6.0±0.4
6.0±0.4
4.8±0.4
Crimping Width
Crimping Height
5