Amphenol RJS-BKN-MG7F3G-704 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Router sieciowy Amphenol RJS-BKN-MG7F3G-704. Amphenol RJS-BKN-MG7F3G-704 15 stron. Ip65/68 sealed managed rugged ethernet switch
Drukuj stronęSection 1
Overview
Managed
switch
Operation
Performance
Specifications
Managed Switch Hardware Manual
Amphenol
– 948, Promenade de l'Arve – BP 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 www.rjswitch.com
General Information
This manual will help you install and maintain the Amphenol Rugged Ethernet Managed
switches. Installation of the MG7F3G managed switches will enable the user to wire redundant
connections between nodes, manage the network by monitoring/gathering network data, allow for
browser or telnet configuration, increase network performance, and more.
Unlike an Ethernet hub that broadcasts all messages out all ports, these switches will intelligently
route Ethernet messages only out the appropriate port. The major benefits of this are increased
bandwidth and speed, reduction or elimination of message collisions, and deterministic
performance when tied with Unmanaged systems.
Note:
This manual only covers the installation and wiring of these switches.
Please refer to the separate
details on configuring and using any of the management functions such as
Refer also to the Ethernet Switch Tool's comprehensive On-line help for more
Unlike a regular Ethernet switch, very resilient networks can be implemented because the Managed
Switch has the intelligence to detect and allow for ring Ethernet topologies. In other words,
implementing this switch will optimize the network for optimal bandwidth conditions, reduce the
number of collisions, and allow for redundant data path connections to reduce/eliminate downtime.
To further aid in network reliability and performance, SNMP is available to extract and exchange
network statistical information. Through the use of SNMP, various groups of statistical
information can be obtained such as TCP, RMON, IP, and more to aid the user's job to extrapolate
the "health" of the network.
The Managed Switches can support 10BaseT (10 Mbps), 100BaseT (100 Mbps) and 1000BaseT
(1000Mbps) on their RJ45 ports (depending on the ports). Each of these ports will independently
auto-sense the speed, allowing you to interface to regular, fast or gigabit Ethernet devices.
These general specifications apply to the Switches. Refer to Section 7 for complete technical
specifications.
10 Ethernet ports (shielded)
Ethernet Protocols
Managed Ethernet Switch Type
Ethernet Isolation
Temperature
Sealing
Shocks
Surge and Spike protection
(with -704 option)
Vibrations
Altitude
Software User Manual for managed switches
SNMP, RSTP, IGMP, port mirroring, etc.
details!
7x 10/100 plus 3x 10/100/1000 (with auto-negotiation, auto-crossover
and auto-polarity)
All standard IEEE 802.3 (see Specifications for details)
Managed with SNMP, RSTP, IGMP, VLANs and much more
1500 Volts RMS (for 1 minute)
Operating
Storage
IP65/68
MIL-STD-810F
MIL-STD-461E
MIL-STD-704A
MIL-STD-1275A: Spikes: +/- 250 V for 100us
RTCA/DO-160C
MIL-STD-810F
Page 4 of 14
-40°C to +70°C
-40°C to +85°C
2 m water for 24 hours
40g, 11ms, 18 saw tooth shocks
CE102 conducted emission
600V input transient, applied for 10µs
Surges: 100 V for 50 ms at 0.5 mohm
Ripple: 14VAC pk-pk)
Sinusoidal vibrations 5-55 Hz: 0.01 inch ;
55-500 Hz: 1.5 g
50,000 ft – 15,000 m
Last Revised: 25-Jun-13
for