Comax CM-PIR03 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Comax CM-PIR03. Comax CM-PIR03 2 stron. Wireless pir motion sensor

Operation

1. Walk in front of sensor, sensor will send the st

2. If no movement detected in three minutes after sent status of "ON", the sensor will send the

no movement detected in three minutes after sent status of "ON", the sensor will send the

3. Normal operation, the LED will not light.

Normal operation, the LED will not light.

4. The CM-PIR03 sensor equipped with tamper switch. If the cover of sensor is removed, the PIR sensor will

sensor equipped with tamper switch. If the cover of sensor is removed, the PIR sensor will

send an alarm report to the Z-Wave

Warranty terms

Comax Guarantees that every PIR sensor

for one year from the date of purchase. If the product proves defective during this one

for one year from the date of purchase. If the product proves defective during this one-year warranty period, Comax

will replace it free of charge.

Note: This warranty does not apply

This warranty does not apply to

Damage to units caused by accident, dropping or abuse in handling, or any negligent use.

•

Units which have been subject to unauthorized repair, taken apart, or otherwise modified

•

Units not used in accordance with instruction

•

Damages exceeding the cost o

Damages exceeding the cost of the product

•

Transit damage, initial installation costs, removal cost, or reinstallation cost.

•

, sensor will send the status of "ON" and the LED will flash once.

Wave Interface Controller, and the LED will go solid.

sensor is free from physical defects in material and workmanship under normal use

free from physical defects in material and workmanship under normal use

status of "OFF"

year warranty period, Comax