Dover DESTACO ROBOHAND DPP Series Instrukcja serwisowa - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Urządzenia przemysłowe Dover DESTACO ROBOHAND DPP Series. Dover DESTACO ROBOHAND DPP Series 4 stron.
Drukuj stronę
Parallel Grippers
1
5
2
6
30
35
SK
Seal Kit
Items
AUTOMATION TECHNOLOGY
Dimensions and technical information are subject to change without notice
Parallel Grippers | Maintenance and Assembly Procedure
12
14
8
11
33
31
32
KRYTOX
KRYTOX
Thread
Krytox
™
Locker
Lubricant
Dimensions and technical information are subject to change without notice
Item
Qty
01
1
02
2
4
03
2
04
2
05
1
06
2
08
1
12
2
14
1
3
23*
–
Notes:
1) Contact the Robohand Sales Department for a complete
spare parts list with order number and prices.
2)* Item #23 quantity and number of different sub-assemblies
varies per gripper model. Contact Sales to determine the
correct quantity and part numbers needed.
23
Accessory Installation & Adjustment Instructions
34
1
Lightweight
Teflon
Based
™
Machine Oil
Grease
169
DPP Series
1. 107
DPP Series
Assembled View
Name
Body
Jaw
Cap
Piston
Equalizer
Link
Linkage Cover
Drive Pin
Pivot Pin
S'assy, Cage & Roller Bearings
Magneto-Resistive Sensors:
1) Install sensors in profile slots of gripper
body as shown.
2) Set sensors with integrated screw.
Inductive Sensors:
1) Insert sensor bracket (#30) into slot of body.
2) Insert dowel pin (#33) and target (#11)
into jaw slot.
3) Insert sensor into bracket and adjust sensor
depth so that sensor light indicates on target.
4) Tighten sensor locking screw (#31) to hold
sensor depth.
5) Position sensor bracket for desired
stroke detection.
6) Tighten sensor bracket with set screw (#32)
to lock stroke detection position.
Super
Third Angle
Bonder
Projection
destaco.com