Dover Hydro Connected Total Eclipse Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Dover Hydro Connected Total Eclipse. Dover Hydro Connected Total Eclipse 17 stron.
Drukuj stronę
initial controller setup (continued)
Setting the Date, Time and Time Zone (continued)
Setting the Time Zone: (continued)
3)
If a custom time offset is needed select CUSTOM and press
the Enter key.
4)
Use the up/down buttons to set the offset at any value from
-12.00 HR to +14.00 HR in 0.25 (15 minute) increments. The
four sets of double-arrow cursors indicate that all digits will
increase or decrease at the same time.
5)
When the correct custom time zone/offset is complete, press the
Enter key to save the setting.
controls
Overview
The Connected Total Eclipse Controller's back-lit screen displays seven
lines of text, with on-screen prompts, in the operating language selected
by the installer.
A green LED indicates power is on. The six-button keypad is used by the
machine operator for formula selection and modification during normal
operation; and by the installer during installation, service, and data transfer.
The USB port accepts a Type-A USB flash drive (8 GB or smaller). It is
used to read and write formulas and settings between the flash drive and
the controller. A USB flash drive can also be used to write Report files
from the controller to the USB drive. These files can then be manually
uploaded to Hydro Connect in cases where a cellular gateway and real-
time streaming is not enabled.
Menu Navigation
F 03 P RO D U C T S
P1 PRE- WASH
P2 DETER GENT
P3 LIQU ID BLEA CH
P4 BLEAC H ALTERNAT
P5 SOUR-CONDITIONR
P6 ENZYME LI FT
connect
NOTE: Press the Enter
a previous menu.
Press the Exit
return to a previous menu.
8
Green LED On = Power On
Menu Title
More Menu Items Available
Exit without saving, or
Formula Select (on Home Screen)
Enter = Launch Menu
or Save Changes
Auto-Key Repeat: Press and hold
any key to repeat key press
key to save your setting changes and return to
key to cancel changes without saving, and
TIME ZONE
GMT
We s t e r n E U
CET
C e n t r a l E U
EET
E a s t e r n E U
ICT
T h a i l a n d
CST
C h i n a
CUSTOM
SET UTC OFFSET
- 06 . 00 HR
OK
EXIT
Up / Down Arrows
1) Moves Selection Box
2) Changes Digit Value
Left / Right Arrows
During edits they move the
Digit Selection Cursor:
Enter / Save Key
1) Launch Selected Menu
2) Save Changes and Exit