Amphony TX1 Instrukcja obsługi i instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Nadajnik Amphony TX1. Amphony TX1 18 stron. Digital wireless audio transmitter / receiver

Drukuj stronę

User and Installation Guide

IMPORTANT SAFETY INFORMATION

READ THESE SAFETY INSTRUCTIONS CAREFULLY AND

HEED ALL WARNINGS IN THIS MANUAL.

POWER SOURCE

To avoid product malfunction, and to protect against electric shock, fire or personal

injury, please observe the following:

• This product has been designed to work with 120-volt AC current using the

supplied AC adapters. Connection to a line voltage other than that or use of non-

compatible AC adapters may create a safety and fire hazard and may damage

the product.

• Do not run power cords under rugs or carpets or place heavy objects on them.

• Damaged or deformed power cords are hazardous and should be replaced

immediately by a qualified service technician.

LOCATION

• Do not use this product outdoors or in cars.

• Air vents are provided at the bottom of the receiver to prevent excessive

temperatures inside the unit. Do not place the receiver in closed spaces, cover it,

or otherwise block the vents.

• Do not place this product in direct sunlight, or near heat sources.

• Keep this product away from strong magnetic objects.

VOLUME CONTROL

• Do not turn up the volume while listening to a portion with very low level input or

no audio signal to avoid damage to your speakers during a peak level audio

portion.

• Turn the speaker volume control to minimum prior to connecting or disconnecting

the transmitter or receiver and prior to switching audio sources as this may cause

loud clicks which can damage your speakers.

CARE

• Do not insert or drop anything into the receiver through the air vents as this could

cause serious damage, possibly resulting in fire.

• Do not place any object containing water or other liquids on this product.

• Do not remove the cabinet. Touching parts inside the cabinet could result in

electric shock and damage to the product.

Page 12

ATTENTION!