Combi Twin Cosmo Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wózek Combi Twin Cosmo. Combi Twin Cosmo 13 stron.

ATTAChING ThE COMBI

1. Insert Combi Shuttle infant carrier into

left side of stroller seat (while facing the

stroller). Ensure bottom of Infant Seat

rests on stroller seat.

WARNING: After installation, lift car seat to verify it is securely locked onto the stroller. Infant car seat MUST be

attached to the stroller in the rear facing position only.

Pull red release lever on Combi Shuttle, while lifting up to release from stroller.

USING ThE SWIVEL WhEELS

To Lock Swivels: Make sure the lock lever is behind

the stroller frame; the lift both swivels lock levers up.

To Unlock Swivels: Push both swivel lock levers

down.

STROLLER ASSEMBLY

ShUTTLE INFANT SEAT

2. Press top and bottom of infant seat down into stroller

until it locks in place.

3. Find the car seat attachment straps located under

the seat pad. Route car seat attachment straps through

the Shuttle

instruction manual for additional information.) Buckle

the car seat attachment straps. Lift up gently on handle

to ensure seat is secure.

REMOVING INFANT SEAT

To Lock Brakes: Push both brake levers down.

To Unlock Brakes: Lift both brake levers up.

CAUTION: Push the stroller forward to ensure

vehicle belt path. (Refer to the Shuttle

™

USING ThE BRAKES

that the brakes are properly engaged.

Twin Cosmo Instruction Manual 5

™