Follett HCC1010WMS Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kostkarka do lodu Follett HCC1010WMS. Follett HCC1010WMS 8 stron. Self-contained chewblet ice machine
Drukuj stronę
6 – Horizon Elite ice tube runs - specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
beverage
dispenser
minimum of
6.00" (15.24 cm)
turn/corner radius
ice transport tube –
1 3/16" OD,
2 1/8" OD with insulation
Ice production – Horizon Elite 1010 series,
air-cooled models
Ambient air temperature F (C)
Inlet water
temperature
60 (16)
70 (21)
F (C)
50 (10)
1160 (526)
1061 (481)
60 (16)
1093 (496)
1001 (454)
70 (21)
1026 (465)
941 (427)
80 (27)
971 (440)
893 (405)
90 (32)
917 (416)
941 (427)
Ice production – Horizon Elite 1010 series,
water-cooled models
Potable
Condenser water temperature F (C)
water
temperature
60 (16)
70 (21)
F (C)
50 (10)
1096 (498)
1043 (473)
60 (16)
1006 (457)
970 (440)
70 (21)
917 (416)
898 (408)
80 (27)
874 (397)
826 (375)
90 (32)
831 (377)
778 (353)
Agion is a registered trademark of Sciessent LLC.
Open Kitchen is a trademark of Powerhouse Dynamics.
HORIZON ELITE, ICE•DEVICE, ICE MANAGER, MICRO CHEWBLET, SAFECLEAN PLUS, SANISPONGE, SYMPHONY PLUS and VISION are trademarks of Follett Products, LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett Products, LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
Self-contained 1010, 1410 series ice machine
7030‑20231110 | © Follett Products, LLC
support
maximum
straps
2' (60.9 cm)
transport tube slope
(toward ice machine)
1/4"
1'
(2 cm per meter)
80 (27)
90 (32)
100 (38)
962 (436)
825 (374)
688 (312)
909 (412)
795 (361)
681 (309)
857 (389)
765 (347)
674 (306)
815 (370)
730 (331)
644 (292)
773 (350)
694 (315)
614 (279)
80 (27)
90 (32)
100 (38)
1001 (454)
947 (430)
892 (405)
938 (426)
888 (403)
839 (381)
874 (396)
830 (377)
786 (357)
826 (375)
787 (357)
749 (340)
778 (353)
745 (338)
712 (323)
Important specifier notes
1. 75' (22.9 m) maximum ice transport
2. Tubing routing bends must have a
3. Dips and traps are not allowed. A
4. Relative humidity levels above 80%
wall-mounted
ice machine
5. Contact factory for recommendations
Ice production – Horizon Elite 1410 series,
air-cooled models
Inlet water
temperature
60 (16)
70 (21)
F (C)
50 (10)
1593 (723)
1466 (665)
60 (16)
1518 (689)
1396 (633)
70 (21)
1442 (654)
1327 (602)
80 (27)
1394 (632)
1272 (577)
90 (32)
1345 (610)
1327 (602)
Ice production – Horizon Elite 1410 series,
water-cooled models
Potable
Condenser water temperature F (C)
water
temperature
60 (16)
70 (21)
F (C)
50 (10)
1436 (652)
1411 (641)
60 (16)
1417 (643)
1367 (633)
70 (21)
1397 (634)
1324 (602)
80 (27)
1318 (598)
1253 (577)
90 (32)
1238 (562)
1183 (602)
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
tube run.
6.00" (15.24 cm) radius or larger.
3" (7.62 cm) or larger PVC pipe chase is
suggested to support the tubing run.
If not supported, secure insulated ice
transport tube at least every 2' (0.61 m)
to prevent drips and traps.
in areas where the ice machine or ice
transport tube is located may produce
excessive condensation that will cause
water damage.
on running tubing through a decorative
soffit or chase.
Ambient air temperature F (C)
80 (27)
90 (32)
100 (38)
1339 (607)
1230 (558)
1121 (508)
1275 (579)
1163 (528)
1052 (478)
1211 (549)
1097 (498)
982 (446)
1150 (522)
1050 (477)
950 (431)
1089 (494)
1004 (456)
918 (417)
80 (27)
90 (32)
100 (38)
1385 (607)
1370 (622)
1354 (615)
1318 (621)
1307 (593)
1296 (588)
1251 (568)
1245 (565)
1238 (562)
1189 (540)
1170 (531)
1151 (522)
1127 (512)
1096 (497)
1064 (483)