Ampler Hawk Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skuter Ampler Hawk. Ampler Hawk 16 stron. 2017
Drukuj stronę12/16
Software restart
Torque sensor calibration
V1.1, 24.04.19
Electric system support
However, we recommend to keep your bike Firmware
up to date and calibrate your bike sensors from time
to time. This will help to keep your bike in a good
shape for longer time.
Software restart clears up your bikes memory and
starts it fresh. It helps to resolve any problems con-
nected to the hardware, and any communication pro-
blems between the bike and the mobile app.
To reset your bike
1. Hold down the power button for 20 seconds. This
will reset and turn off your bike.
2. Turn on the bike again from the power button.
Ampler bikes are pedelecs and they have sensors
regulating the motor, measuring the speed of pedal-
ling and your own input power. Therefore, the bike is
easy to use and the motor power is controlled accor-
ding to your own pedaling force. This creates a safe
and smooth riding experience.
We recommend to calibrate your bike's torque sensor
every 3–6 months, or in case the bike feels over- or
underpowered. Torque sensor calibration is done via
the Ampler app:
1. Adjust the left crank forward, parallel to the
ground.
2. Connect the Ampler app with your bike via
Bluetooth
3. Open 'Vehicle' setting from the menu
4. Click on 'torque sensor calibration'
5. The LED blinks in
6. The LED will turn
successful
If you ordered your bike in 2016 or beginning of 2017,
your bike has an older Firmware. Please follow these
steps:
1. Adjust the left crank forward, parallel to the ground.
2. Switch on the bike
3. Hold the button down for 9 seconds (use the stop-
per if needed) and let go – it will change colours
orange
green
once the calibration is