Amplico Impact-C Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pulpit Amplico Impact-C. Amplico Impact-C 12 stron. Impact-c tower pc system

STEP 6 - VERIFY THAT THE MODEM IS COMMUNICATING WITH WINDOWS

Click the 'Start' button and click 'Control Panel'.

Click 'Printers and Other Hardware'.

Click 'Phone and Modem Options'.

Click the 'Modems' tab.

Click the COM port for your modem.

Click 'Properties', click the 'Diagnostics' tab, and then click 'Query Modem' to verify that the modem is

communicating with Windows.

If all commands receive responses, the modem is operating properly.

STEP 7 - CONTACT YOUR ISP

Please call your Internet Service Provider (ISP) who will run a diagnostic on your line and service.

STEP 8 - CONTACT TECHNICAL SUPPORT

If none of the previous steps have resolved your problem, please call the Amplicon technical support line on

844 324 0617

5.5 Error messages

If the message is not listed, see the documentation for the operating system or the program that was running when

the message appeared.

A FILENAME CAN NOT CONTAIN ANY OF THE FOLLOWING CHARACTERS: \ / : * ? " < > |

Do not use these characters in filenames.

A REQUIRED .DLL FILE WAS NOT FOUND

The program that you are trying to open is missing an essential file. To remove and then reinstall the

program:

Click the 'Start' button, click 'Control Panel', and then click Add or Remove Programs.

Select the program you want to remove.

Click the Change or Remove Program icon.

See the program documentation for installation instructions.

Drive letter :\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY

The drive can not read the disk. Insert a disk into the drive and try again.

NON-SYSTEM DISK ERROR

Remove the floppy from the drive and restart your computer.

NOT ENOUGH MEMORY OR RESOURCES. CLOSE SOME PROGRAMS AND TRY AGAIN

Close all windows and open the program that you want to use. In some cases, you might have to restart your

computer to restore computer resources. If so, run the program that you want to use first.

For all other error messages not covered by your software help, contact Amplicon technical support on 0844 324

0617.

Amplicon.co.uk

Sales:

+44 (0) 1273 570 220

IT and Instrumentation for industry

Website:

www.amplicon.com

Email: