Combi F72 Instrukcja obsługi i instrukcja kontroli - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja kontroli dla Meble dla niemowląt i małych dzieci Combi F72. Combi F72 8 stron. Baby keep fit

Drukuj stronę

This manual describes the details of "Daily Inspection" and "Periodic Inspection" required to use Combi Baby Keep Fit

F72 safely and comfortably. Follow the contents of this manual and make sure to carry out the daily or weekly inspec-

tions and periodic inspection every year correctly.

Warning

Carry out daily inspection and periodic inspection once a year to ensure safety. Failure to do so may cause an injury or seri-

ous accident caused by undiscovered deterioration or damage to the product.

Daily inspections are carried out by visual and touch.If any abnormality is found

Daily Inspection

in the inspection, use a tool to perform the inspection depending on the case.

Periodic Inspection

Each part is inspected every year using a tool.

As a result of the inspection, parts may need to be replaced.

*The stock period of the repair parts is 5 years after the final production.

Required Tools

Phillips Screwdriver

No.2, No.3

Daily Inspection

Daily inspection should be carried out daily or weekly. Inspections are done by visual and touch.

If any abnormality is found in the inspection, use a tool to perform the inspection depending on the point.

● If any abnormalities are found during inspection, stop using the product and contact your dealer to request repair.

A. Checking the Appearance

Inspection Points

①

Looseness of the main body

②

Looseness of guard section

③

Looseness of back cushion

④

Looseness of seat pad

⑤

Detachment of plastic cap

⑥

Scratches or breakage of the main body

⑦

Scratches or damage of the back cushion material

⑧

Soil on main body

⑨

Soil on back cushion material

Looseness of the Guard

②

Make sure that there is no looseness in

the guard after shaking the guard to left

and right.

Combi Baby Keep Fit F72

Inspection Manual

Prepare the following tools.

Flat-Head Screwdriver

Inspection Method

Visual and touch

Wrench (nominal 17MM)

Judgment Criteria

Motion,

No looseness when the main

body is being shaken.

Motion,

When the guard is shaken by hand,

there should be no rattling.

Motion,

When the back cushion is shaken by

hand, there should be no looseness.

Motion,

When the seat pad is shaken by hand,

there should be no looseness.

Visual

No peeling or missing

Visual

No serious scratch or damage

Visual

No severe cut or damage

Visual

No soiling

Visual

No soiling

Daily or Weekly

Caution

Do not use the power tool when fastening the

product. Make sure to tighten by hand and do

not use the power tool.

Any use of the power tool may result in damage

to the plastic part.

Handling of Defect

Retightening (see page 6

of periodic inspection)

Once a Year

Repair

Replacement

Repair

Replacement

Cleaning