Caraudio-Systems RL-UCON22-TF Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Samochodowy system wideo Caraudio-Systems RL-UCON22-TF. Caraudio-Systems RL-UCON22-TF 7 stron. Interface for activation of factory rear-view camera input for uconnect 5“ or 8,4“ system with 22 pin connector
Drukuj stronę
1.4.
Setting the Dip-‐switches of the Can-‐box
Vehicle/ navigation
Video-‐in-‐motion permanent
Video-‐in-‐motion selective*
* With dip1 to OFF the included green cable is used to activate the video-‐in-‐motion function.
Note: Dip switch functions of the CAN-‐box
Dip 1 – activation video in motion
Dip 2 – Rear-‐view camera coding
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-‐bus termination resistor on the vehicle side
Dip 6 – CAN-‐bus termination resistor on the head-‐unit side
Pin-‐assignment of the CAN-‐Box CAN-‐box (Molex 8pin)
Cable colour
Pin-‐No. Assignment
●
Yellow
Pin 4
● Blue
Pin 3
●● Yellow/Black Pin 8
●● Blue/Black
Pin 7
●
Red
Pin 1
● Black
Pin 5
● Green
Pin 6
● White
Pin 2
Version 01.04.2015
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
ON
ON
OFF
ON
CAN-‐HIGH – connection to the head-‐unit
CAN-‐LOW – connection to the head-‐unit
CAN-‐HIGH – connection to the vehicle
CAN-‐LOW – connection to the vehicle
+12V permanent
Ground
Activation of the video-‐in-‐motion function
(+12V = TV-‐free activated, only if Dip1=OFF)
Trigger output (+12V DC 500mA)
(only if Dip2=ON and reverse gear engaged!)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
RL-‐UCON22-‐TF