Amplicon CC-80 Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Przyrządy pomiarowe Amplicon CC-80. Amplicon CC-80 4 stron. Current clamp
Drukuj stronęManual
Safety
This instrument complies with class II, overvoltage CAT II - 600 V
of the EN 61010-1 and EN 61010-2-032 standards. Polution degree
2 in accordance with IEC 664 indoor use. If the instrument is used
in a manner not specified, the protection provided by the instrment
may be impaired.
Do not lcamp around conductors with voltages equal to or
exceeding 300 V DC or 240 Vrms AC.
To avoid physical injury, measurements on bare conductors
or conductors wit hdamaged insulation are not allowed
Battery replacement
When the low battery LED is lit, replace the old battery with a
new one:
1. Turn the power off and disco0nnect the test leads from the
current clamp.
2. Remove the screw from the battery compartment at the back
of the clamp.
3. Remove the old battery.
4. Insert a new 9 V NEDA 1604, IEC 6F22 battery.
5. Repstore the battery compartment cover and tighten the screw.
6. Dispose of the old battery properly.
Amplicon.co.uk
Sales:
+44 (0) 1273 570 220
All manuals and user guides at all-guides.com
IT and Instrumentation for industry
Website:
www.amplicon.co.uk
Current Clamp CC-80
Email:
3