Dahua DH-PFS4218-16GT-190 Skrócona instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Dahua DH-PFS4218-16GT-190. Dahua DH-PFS4218-16GT-190 19 stron. 16/24-port poe gigabit managed switch
Drukuj stronę
The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white,
2-orange, 3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).
3.2.2 Console Port
See Figure 3-4 for console port. The switch console port and computer controlling 9-pin serial
port are connected with RJ-45-DB9 cable. You can call the console software of the device by
operating the superterminal software of the Windows system for device configuration,
maintenance, and management.
See Figure 3-5 for cable sequence of RJ-45-DB9.
One end of RJ-45-DB9 cable is RJ-45 connector, which needs to be inserted into the console
port of the device. And the other end is DB9 plug, which needs to be inserted into the computer
controlling 9-pin serial port.
See Table 3-1 for pin description.
DB9 pin
2
3
5
3.2.3 SFP Port
The signal is transmitted through laser by optical fiber cable. The laser conforms to the
requirement of level 1 laser products. To avoid injury upon eyes, do not look at the 1000 Base-X
optical port directly when the device is powered on.
Figure 3-4
Console port
Figure 3-5
Cable sequence of RJ-45-DB9
Table 3-1 Pin description
RJ-45 pin
Signal
3
RXD
2
TXD
5
GND
Description
Receiving data.
Sending data.
GND
Installation 6