Dahua SG4028 Skrócona instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Dahua SG4028. Dahua SG4028 17 stron. 16/24-port managed gigabit switch

There is a GND screw on the device cover board for the GND cable, which is called enclosure GND.

Connect one end of the GND cable with the cold-pressed terminal, and then fix it on the enclosure

GND with the GND screw. The other end of the GND cable should be reliably connected to the

ground.

The sectional area of the GND cable should be more than 2.5 mm

, and the GND resistance shall be

less than 4 Ω.

Figure 3-8 GND terminal