Amplink PDM60 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca Amplink PDM60. Amplink PDM60 12 stron.

Installation Basics

1. Install the "Amplink PDM" App on your smartphone

2. Determine a suitable location to mount the Amplink PDM near the battery

3. Connect the Amplink to the battery, red (+) wire first then the black (ground) wire

4. Open the App, wait for it to pair to the Amplink, then make your settings (See "App Connection

Instructions")

5. The small green led on the Amplink means the Bluetooth signal is being broadcast. If the light is

not on, it will not connect to your device. It will time out after 1 minute if the unit is not triggered or

currently connected to a Bluetooth device.

5. Connect the trigger wires and output wires using the Posi-connectors or other appropriate method

6. Activate the Amplink PDM using your trigger method

Note: Before completing a full installation of your Amplink, we recommend bench testing to ensure your

setup functions as desired.

The app is designed to be simple and straight to the point. It is intended to be a tool for programming

and monitoring the output status only. The app has four pages:

Monitor – shows the status of each of the 6 outputs, when paired to the Amplink PDM

Setup – access each output individually to setup the behavior

Triggers – access each of the 3 input triggers to setup the behavior

Information – user manual and product information

1. Load the Amplink PDM app

2. Connect the Amplink PDM power and ground wires to a 12V battery and enable Bluetooth on your

mobile device.

3. See specific instructions on page 5 for initial pairing of Android and Apple devices

Never interact with the app while operating a vehicle.

Page 4 of 12