Advanced AS4000 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt bezpieczeństwa Advanced AS4000. Advanced AS4000 15 stron. Iron slider beam anchor

Note: Owner is to have a written rescue plan and the means to implement it. System is to

be used for fall protection only. Any other use voids the warranty and renders the system

unusable. Always perform a hazard analysis before use that will identify impact and swing

hazards, or any other hazards that may exist. Address and correct all hazards before use.

Always use the buddy system when using fall protection (the monitor or "buddy" does not

need to be physically on the system, just nearby, supervising).

Never add additional carabiners, D-Rings, shackles, or connecting hardware to this system. If

connecting hardware must be added, compatibility must be verified by a competent person.

CLEANING AND MAINTENANCE

Cleaning after use is important for maintaining the safety and longevity of the Multi-

Directional Anchor Plate. Remove all dirt, corrosives, and contaminants from the Iron Slider

AS600 before and after each use. If the AS600 cannot be cleaned with plain water, use mild

soap and water, then rinse and wipe dry.

NEVER clean the Iron Slider AS600 with corrosive substances. When not in use, store the

equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other

degrading elements.