Amplitec C20L-CDMA Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz Amplitec C20L-CDMA. Amplitec C20L-CDMA 13 stron.
C20L Signal Booster
Installation Guide
Installation Requirements
1) Stable and independent power supply
2) No corrosive gas, smoke or liquid leakage
3) Sun block and good for heat dissipation
4) Easy for cabling, safe and easy for maintenance
5) Waterproof and under thunder protection
Installation Tools
No.
Items
1
Percussion drill
2
Wrench
3
Expansion tubes, screws
4
Mobile phone for testing
5
Multimeter
6
Screwdriver
7
Waterproof tape
Installation Steps
The repeater should be installed on a solid and hard plane. The installation steps are as follows:
1) Find a suitable site according to the installation requirements, size and dimension of the booster.
2) Estimate and mark the site of U-shaped back holder installation holes. Drill holes with the
percussion drill. Sizes are 7mm.
Quantity
1
Drill holes on wall, self-provided
1
Reinforce the interface connection, self-provided
4 for each Fix the device on the wall, included in the package
1
Test installation effectiveness, self-provided
1
Test voltage and wiring connection, self-provided
1
Tighten or fasten the device, self-provided
Prevent liquid from leaking into the feeder
A lot
interface, self-provided
8
Remarks