Advanced MxPro 5 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Advanced MxPro 5. Advanced MxPro 5 10 stron. Pager interface
Również dla Advanced MxPro 5: Podręcznik (14 strony), Nota aplikacyjna (10 strony)

Drukuj stronę

3 Configuration

To configure and test the printer, select the printer options from the main level 2 menu.

[Print Menu]

INPUTS OUTPUTS

FAULTS

LOG

FEED PAPER

Use the  buttons to highlight and select the "SETUP-PRINTER" option

Use the  buttons to highlight and press ✔ to select the "Internal" option.

(Note: If required the panel will support simultaneous printing to an external printer too, but the "wide" option

should not be ticked when an internal printer is in use).

[FIRES] [ALARMS]

(Printer: Internal External/Wide)

✔

On the top line tick any events that should be automatically printed as soon as they occur.

FIRES

any device entering a fire condition

ALARMS any device entering a pre-alarm or plant alarm condition

FAULTS

any fault detected by this panel

TESTS

any device that is activated during a fire-test

On networked systems the fires, alarms and tests, if selected, print events occurring on other panels in the

network (The network configuration software will allow this to be restricted to just certain parts of the building if

required).

Escape from the printer set-up and move to the test menu. Perform a "Test – Print" and check that the printer is

functioning correctly.

For full information on the print displays and configuration options, please refer to the 'User Manual' (680-166).

www.advancedco.com

DISABLED

SETUP-PRINTER

[FAULTS] [TESTS]