Advanced MxPro 5 Nota aplikacyjna - Strona 8

Przeglądaj online lub pobierz pdf Nota aplikacyjna dla Sprzęt nagrywający Advanced MxPro 5. Advanced MxPro 5 10 stron. Pager interface
Również dla Advanced MxPro 5: Podręcznik (10 strony), Podręcznik (14 strony)

Drukuj stronę
Advanced MxPro 5 Nota aplikacyjna
[Loop
1 Devices]
Address Additional Info
>001.0
Disco
002.0
XP95
003.0
Disco
004.0
Disco
Refer to Apollo's literature for a full explanation of the drift mechanism and for further information on the expected
values.
The panel will indicate a Warning Condition (Drift Detected) when the drift compensation reaches maximum (100%)
and the device can no longer compensate and maintain sensitivity levels.
The panel will indicate a Fault Condition (Device Dirty) when the drift compensation has reached maximum and the
analogue value is 35 or higher. The panel checks this condition once every 24-hours. The status will be
immediately updated if a Calibrate or Auto-Learn is performed.
2.4.2 Rapid Compensation
Apollo has incorporated a rapid compensation facility into the Discovery devices. If a device is changed during
service it can be quickly adjusted to the present ambient conditions.
Highlight the required "Disco" family device, select RAPID COMPENSATION and then press the ✔ button to
confirm. The panel will now instruct this device to perform a rapid compensation. This will take approximately 30
seconds.
This operation must only be performed with the detector in clean air.
No other operation should be performed on this device during this rapid compensation period.
2.4.3 View EEPROM
The panel can read any of the extended memory locations within the Discovery devices.
Highlight any "Disco" family device, select VIEW EEPROM and then press the ✔ button to confirm. The display will
prompt for entry of the required extended memory address. For example:
[Loop
1 Devices]
Address Additional Info
EEPROM
ADDRESS=#
Enter the required address using the number buttons and then press the ✔ button to confirm.
The panel will now read the extended memory locations for all Discovery devices on the loop. When complete, the
display will present the information as follows:
[Loop
1 Devices]
Address Additional Info
>001.0
Disco
002.0
XP95
003.0
Disco
004.0
Disco
Refer to Apollo's literature for an explanation of the extended memory locations and for further information on the
expected values.
<More>
Drift = 20%
Drift =
6%
Drift =
3%
<More>
<More>
EEP[ 1] = 23
EEP[ 1] = 21
EEP[ 1] = 22
www.advancedco.com