Comcast Custom DVR-3 Device Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pilot zdalnego sterowania Comcast Custom DVR-3 Device. Comcast Custom DVR-3 Device 5 stron.

Drukuj stronę

Comcast Custom DVR-3 Device Podręcznik użytkownika

NOTE: If you enter an invalid code,

the selected mode key will display one

long blink and exit the programming

mode. Repeat steps 2 to 5 with a valid

code.

Aim the remote control at your

device and press Power once.

The device should turn off. If it

does not respond, repeat steps 2

to 6, trying each code listed for

your brand until you find one

that works. If it still does not

work, try Searching For Your

Code.

NOTE: If the device does not have a

Power

Play

key, press the

(

) key.

For future reference, write your

device code in the appropriate

boxes below:

AUX Code:

Device Type:______________

TV Code:

Repeat steps 1 to 7 for another

device you want to control.

SEARCHING FOR YOUR CODE

If your home entertainment device does

not respond to the remote control after

trying all of the codes listed for your

brand, or if your brand is not listed at

all, try searching for your code.

For example, after trying all of the

codes for your TV, you still cannot get

the remote control to operate your TV,

then:

Turn on your TV.

On the remote control, press TV

once. Then press and hold Setup

until the TV key blinks twice,

then release Setup.

Enter 9 - 9 - 1. The TV key will

blink twice.

Press and release the digit 1. The

TV key will blink twice.

Note: Substitute 1 with 0 if

searching for a Cable code, 2 if

searching for a DVD, VCR or

PVR and 3 if searching for an

Audio device

Press Power and aim the remote

control at the TV and press CH +

one or more times until the TV

turns off.

NOTE: In the search mode, the

remote control will send IR codes

from its library to the selected device,

starting with the most popular code

first.

Press Setup once to lock in the

code.The TV key will blink twice.

To search for the codes of another

device, repeat steps 1 to 5, but

substitute the AUX key for the

device you are searching for.

CHECKING THE CODES

If you have set up the remote control

using the Searching For Your Code

procedure, you may need to find out

which five-digit code is operating your

equipment. Perform the following steps

after setting up your devices to find

out which five-digit code operates your

equipment. For example, to find out

which code is operating your TV:

Turn on your TV.

On the remote control, press TV

once. Then press and hold Setup

until the TV key blinks twice,

then release Setup.

Enter 9 - 9 - 0. The TV key will

blink twice.

To view the code for the first

digit, press 1 once. Wait 3 sec-

onds and count the number of

times the TV key blinks (e.g., 3

blinks =3) and write down the

number in the left most TV Code

box (at end of this section).

NOTE: If a code digit is "0", the

selected mode key will not blink.

Repeat step 4 four more times for

the remaining digits. Use 2 for the

second digit, 3 for the third digit,

4 for the fourth digit and 5 for the

fifth digit. Finish writing down the

code in the TV Code boxes (at end

of this section).

To check another device code,

repeat steps 1 to 5, but substitute

the AUX key for the auxiliary

device you are checking. Write

down the codes in the appropri-

ate boxes below:

AUX Code:

Device Type:______________

TV Code:

CHANGING VOLUME LOCK

The Comcast Custom 3-Device univer-

sal remote control is set at the factory

to control the TV volume in all modes.

However, you may change the Volume

Lock setting to Individual Volume

Unlock to unlock a specific device' s

volume controls for independent

operation in its own mode (e.g., Audio

Receiver volume controls in the AUX

mode).

Or, if desired, you can perform Global

Volume Unlock so that the volume

controls of all devices can be indepen-

dently operated in their own modes.

Unlocking Volume Control For A

Single Device (Individual Volume

Unlock):

Press a desired mode key where

you want volume to be unlocked

(e.g., AUX) and controlled within

its own mode.

Press and hold Setup until the

selected mode key blinks twice,

then release Setup.

Enter 9 - 9 - 3 and then press

VOL- once. The mode key will

blink four times confirming

unlock.

If desired, repeat steps 1 to 3 (of

this section) for each device that

you want volume to be unlocked.

Now, after you select a device that

has volume unlocked (e.g., AUX),

pressing VOL+, VOL-, or Mute,

will control the device' s volume

only in its own mode.

Unlocking All Volume Controls

(Global Volume Unlock):

Press and hold Setup until the

selected mode key blinks twice,

then release Setup.

Enter 9 - 9 - 3 and then press

VOL+ once. The mode key will

blink four times confirming

unlock.

Now, volume controls for all

devices can be independently

controlled in their own modes.

Locking Volume Control To TV

or AUX Mode:

Press and hold SETUP until

the Red light flashes twice, then

release SETUP.

Enter 9 - 9 - 3 (Red light will

flash twice).

Press and release either TV or

AUX (Red light for selected

device will flash twice).

REASSIGNING DEVICE KEYS

With the Comcast DVR remote, you

can easily decide what device you want

to add under the AUX mode.

For example, to have the unit control

a TV, a Cable Box, and second TV all

you need to do is enter in the TV code

as follows:

On the remote control, press AUX

once. Then press and hold Setup

until the AUX key blinks twice,

then release Setup.

Enter 1-0-0-4-7

The AUX key is now ready to be

programmed for your second

TV. See Programming Device

Control for instructions.

PROGRAMMING CHANNEL

CONTROL LOCK

By default, the remote control' s chan-

nel-control capabilities are locked to

the Cable Box. The affected keys are 0

~ 9, CH+, CH-, Enter, and Last.

This will guarantee that you do not

inadvertently change a channel while

in the TV mode. However, you can

turn off this feature to allow full access

to these keys in the TV and Cable

modes.

AUX

NOTE: This feature does not affect the

mode.

De-Activating Channel Control

Lock

On the remote control, press

Cable once. Then press and hold

Setup until the Cable key blinks

twice, then release Setup.

Enter 9 - 7 - 3. Press CH- once.

The Cable key will blink four

times.

Now, the remote control will

provide TV or cable channel

control capabilities while in the

TV or Cable mode.

Re-Activating Channel Control

Lock

On the remote control, press

Cable once. Then press and hold

Setup until the Cable key blinks

twice, then release Setup.

Enter 9 - 7 - 3. Press CH+ once.

The Cable key will blink twice.

Now, regardless if you select

the TV or Cable mode, only the

channel control capability of your

cable box will be accessible.

TROUBLESHOOTING

PROBLEM: A mode key does not

blink when you press a

key.

SOLUTION: Replace the batteries

with two (2) new AA bat

teries.

PROBLEM: During programming, a

mode key displays one

long blink.

SOLUTION: An invalid entry has

occurred. Check the key

to be entered and try

programming again.

PROBLEM: A mode key blinks

when you press a key,

but home entertainment

component does not

respond.

SOLUTION: Make sure the remote

control is aimed at your

home entertainment

device and is not farther

than 15-feet away.

PROBLEM: The remote control does

not control home enter-

tainment devices or the

commands are not work-

ing properly.

SOLUTION: Try all listed codes for

the device brands being

set up. Make sure they

can be operated with an

infrared remote control.

Fold