Comcast DPC3941T Instrukcja połączenia - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Gateway Comcast DPC3941T. Comcast DPC3941T 8 stron. Wireless gateway
Również dla Comcast DPC3941T: Instrukcja połączenia (8 strony)

Drukuj stronę

Wireless Gateway Activation

Process over WiFi

A. Plug In and Power Up

1. Connect a coax cable from your cable wall outlet to the Cable/

RF In connection on your Wireless Gateway. Make sure this

connection is ﬁ nger tight.

Note: You may only need one coax cable for your Wireless Gateway

connection, so select the length that best suits your needs.

2. If you subscribe to Comcast Voice service, connect a telephone

cord (not included) from your telephone into the Tel 1 connection on

your Wireless Gateway.

If you don't subscribe to Comcast Voice service, skip this step.

3. Insert the power cord into your Wireless Gateway, and plug into an

electrical outlet.

a. The Power LED will light.

b. The US/DS and the Online

LEDs will go through a

series of blinking patterns

in order to connect to the

Comcast network properly.

DO NOT proceed until both

US/DS and the Online

LEDs stop blinking and

remain solid for at least 1

minute. Do not unplug the

Wireless Gateway during

this process.

Note: This process may take up to 5 minutes.

WGXB3_SIK_0415.indd 3

3/26/15 11:21 AM