AmpliVox AirVox SW695 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników AmpliVox AirVox SW695. AmpliVox AirVox SW695 12 stron. Battery powered pa system with bluetooth
Drukuj stronę
WIRELESS SPEAKER TRANSMITTER S1692T (OPTIONAL EQUIPMENT)
OPERATES ON DIFFERENT FREQUENCIES THAN AMPLIVOX WIRELESS MICROPHONE / RECEIVER
16 CH UHF WIRELESS SPEAKER TRANSMITTER
Must be installed into S690 / SW690 / SW695
FEATURES
•
Channel Display (A)
•
TX - Radio Frequency Indicator (B) lights when turned on
•
AF - Audio Frequency Indicator (C) lights when transmitting
•
Select Buttons - Manual Channel Selection (D) Up / Down
•
Power / Volume Control (E)
WIRELESS SPEAKER SETUP
• The transmitter has its own POWER / VOLUME Control (E). First make sure that you have installed the UHF an-
tenna. Turn Main Power On of the S690 / SW690 / SW695, then turn transmitter Power On (E). A Frequency Chan-
nel will appear in the Channel Display (A). Press Select Buttons (D) to select a channel. Channel number must
match channel number on wireless receiver of the AirVox Speaker. EXAMPLE: Select Channel 10 on transmit-
ter (S1692T) and select Channel 10 on the speaker receiver of the S1274. The AF LED will light when receiver
of the S1274 sees the transmitting signal. RF LED of receiver (S1274) will light when channels are matched and
receiving a signal.
OPERATE
• S690 / SW690 / SW695: turn on main power / wireless microphone receiver / wireless speaker transmitter / wire-
less microphone.
• S1274: turn on main power / wireless speaker receiver.
• To start, set all volume controls of the wireless devices to MID POINT. Test speaking into the wireless microphone
and adjust level of main volume controls first to the desired level. If you feel that you need to increase sound level
then adjust levels of the wireless devices.
S690 / SW690 / SW695
Model SW690
Shown With Wireless Speaker
Transmitter Installed
UP TO 300 FEET
9
B
C
A
E
D
S1274