AmpliVox SB8001 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników AmpliVox SB8001. AmpliVox SB8001 8 stron. With bluetooth battery powered pa system

Drukuj stronę

WIRELESS HANDHELD MICROPHONE TRANSMITTER

If you are using the AmpliVox S1695 Wireless Handheld Microphone Transmitter, screw off the lower bottom section of microphone

and insert 2 - "AA" 1.5 Volt alkaline batteries.

•

IMPORTANT: Because the microphone has an AUTO SYNC function, you first select channel you wish to use on the receiver.

Then press the ASC button (D), the IR light will start to flash. Turn on microphone and point end (6) of microphone at the flash-

ing IR light on receiver and the microphone will auto sync to the same channel as selected on the receiver.

•

IMPORTANT: INSERT BASE OF MICROPHONE FIRST WHEN PLACING INTO THE STORAGE COMPARTMENT.

BATTERIES

1. Hold the body of microphone in hand and twist off bottom

section of microphone.

2. Insert two "AA" batteries.

3. Twist bottom section back on to microphone.

BATTERY STATUS

The life expectancy of the two batteries is about 10 hours.

When the "BATTERY" symbol on the display screen keeps

flashing the batteries should be replaced immediately.

Functions

1) Interchangeable Microphone Head

2) LCD Screen

3) Power / Mute Control Switch

4) Select Button

5) Microphone Input Sensitivity Ad-

justment—is used to set the gain of

microphone. If you are a soft talking

speaker you will need to turn the control

counter clockwise. Turn clockwise if you

are a loud talker. Use plastic screwdriver

that is supplied.

COMPACT DISC / MEDIA PLAYER OPERATION

•

HANDLING THE DISCS:

Always insert a CD, CD-R, CD-

R/W into player with label side

up! Proper handling and care of

CDs should be taken to insure

proper operation. Fingerprints

and dust should be carefully

wiped off the surface, starting

from the center of the disc and

moving out towards the edge. It is best to avoid touching

the surface opposite the label to prevent scratching or

leaving fingerprints on the surface area. Always remove

disc from player before transporting unit.

INPUTS

•

USB 2.0 / SD CARD SLOT: For Flash / Thumb drive memory devices and SD cards containing MP3 music files.

Microphone Operation and Status Display

•

TURN ON MICROPHONE: Push and hold the

"POWER/MUTE" (3) button until LCD screen

lights up.

•

TO MUTE: Press "POWER/MUTE" button twice

to MUTE. Channel number will flash when muted.

Press button again twice to remove "MUTE".

•

TURN OFF MICROPHONE: Push and hold the

"POWER/MUTE" (3) button for 2 seconds to turn

microphone "OFF".

•

SELECT CHANNEL (Manual): Press and hold

the "SELECT" (4) button for 2 seconds until you

only see the word Channel and channel number.

To change channel, when flashing, press the

"SELECT" (4) button until you reach the desired

channel. Flashing will stop after 10 seconds and

channel is now set.

•

LOCK / UNLOCK CHANNEL: Push the

"POWER/MUTE" (3) button and "SELECT"

button at the same time to lock or unlock channel.

When locked, channel cannot be changed.

"LOCKED" symbol appears in upper left-hand

corner.

•

NORMAL DISC PLAY: Insert CD into

player and press PLAY/PAUSE button if CD hasn't already be-

gun to play. Disc play will start at first track. Player display will

indicate track number and time.

LOADING AND UNLOADING DISCS:

Gently insert disc into player slot until

engagement mechanism pulls CD into

player. Do not force CD into unit. To

remove disc press EJECT button. CD

will stop playing and will slowly eject

from player. Gently remove CD, place

CD back into jewel case.