Comcast XCLASS Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla TV Comcast XCLASS. Comcast XCLASS 20 stron.

You'll need to scan for channels after setting your antenna up. To do that:

Turn your TV on and press the home button

Select the Antenna tile, or open Settings > Antenna and inputs > Antenna

> Channel scan

Follow the on-screen instructions, then select Scan for channels

Wait while your TV scans for channels – this can take several minutes

When the channel scan is finished, you'll see the number of channels that

were added

Click Continue

If you're using an antenna with a twin-lead cable, you may need a 300-75 Ohm

adapter (not included) to be able to use your twin-lead cable with your TV. If you're

using multiple antennas, you may also need a combiner (not included).

Connecting an HDMI device

To connect an HDMI device, plug one end of an HDMI cable (not included) into

1 of your TV's 3 HDMI ports (see Table 1 below). Then plug the other end into your

device.

To connect to a device using a composite video cable, plug the red, white, and

yellow ends of the composite video cable (not included) into your TV's AV IN port

(see Table 1). Then plug the other end into your device.

To connect headphones (not included) to your TV, plug them into your TV's

HEADPHONE port (see Table 1). The sound from the built-in speakers of the TV will

be disabled when the headphones are connected.

on your remote