Dahua Technology COP Security ITC237-PU1A-IRHL Podręcznik szybkiej instalacji - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik szybkiej instalacji dla Aparat cyfrowy Dahua Technology COP Security ITC237-PU1A-IRHL. Dahua Technology COP Security ITC237-PU1A-IRHL 12 stron.

Drukuj stronę

Select the Link Sign Out tab, this option sets when the alarm output will trigger and also the time the alarm output triggers for.

Select the Enable tickbox to enable the alarm output

There are three operating modes:

Traffic Trust List

All Snap Car

Order

When testing the alarm output the Hand On button can be used. Selecting this button will trigger the alarm output so control of external

devices can be tested.

IR LED ADJUSTMENT

The built-in IR LEDs of the camera can be configured to adjust the intensity of the IR Light.

Go to Setup > ITC > Extra Device > Light(485) Config

Work Mode

Light Brightness

Light Arr Mask

Auto Mode

Prevalue

Select Save to store the settings.

Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com

Trigger the alarm output based on white list

Trigger the alarm output for all vehicles

Trigger the alarm output using computer software (This feature is currently unavailable)

Used to set the IR working mode manually or automatic, the recommended setting is Auto

The intensity of the IR lights

Select which array of LEDs are used. There are six LEDs grouped in pairs, each tickbox represents

and array. The default setting is all arrays selected.

Set whether the IRs should turn on/off based on LUX level or by a timed schedule.

The level the LEDs should turn on/off at based on LUX. (Only applicable when Auto Mode is set

to Brightness).