Advanced Amplifiers AA-1M6G-30 Instrukcja obsługi i skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi i skrócona instrukcja obsługi dla Wzmacniacz Advanced Amplifiers AA-1M6G-30. Advanced Amplifiers AA-1M6G-30 9 stron. Solid state rf amplifier system
Drukuj stronęBEFORE USING THIS EQUIPMENT
Read this manual and become familiar with safety markings and instructions.
Inspect unit for any sign of external damage. Do not use this equipment if there is physical damage or missing parts.
Verify the input AC voltage to the main power supply.
For a system with a digital controller option – DO NOT USE OR CONNECT a PoE enabled ethernet switch to a system.
Our digital controller does not support PoE connection and will cause permanent damages to a controller unit.
INTENDED USE
This product is intended for general laboratory use in a wide variety of industrial and scientific applications.
RF OUTPUT LOAD & PROPER GROUNDING REQUIRED
The RF output connector must be connected to a load before the AC switch is turned on.
AC & RF power must be off before disconnecting the output load or other components.
The main power source to the equipment must have an uninterrupted safety ground that has sufficient size to the
power cord.
REPAIR & MAINTENANCE
All repair or maintenance work must be performed by a factory authorized technician in order to extend the operating
life of this equipment and not to void any outstanding warranty.
FORCED AIR COOLING
This equipment requires forced air cooling. All air inlets and outlets must be cleared and free of blocking at all time.
Insufficient air flow will result in damaged equipment.
SAFETY SYMBOLS
This symbol is marked on the equipment when it is necessary for the user to refer to the manual for
important safety information. This symbol is indicated in the Table of Contents to assist in locating
pertinent information.
Dangerous voltages are present. Use extreme care.
The caution symbol denotes a potential hazard. Attention must be given to the statement to prevent
damage, destruction or harm.
This symbol indicates protective earth terminal.
SAFETY INSTRUCTIONS
- Ver. 1.0 – 11-22
3 |
P a g e