DPA 4033 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikrofon DPA 4033. DPA 4033 9 stron. Headset microphone; compact omnidirectional microphones 12mm
Drukuj stronę
Mounting the Headset Microphone Type 4035
1.
Strap the microphone around the headbrace of the headphone so
the cable is also secured by the strap. Use the rubber block to
protect the cable, ensuring there is enough slack to allow the
microphone arm to be adjusted later. (see fig. 6)
2.
Tighten the strap using a screwdriver.
3.
Cut off any excess at the loose end of the strap.
4.
Tape the microphone cable and the headphone cable together.
5.
Make adjustments to the orientation of the headset unit.
6.
When the headphones are worn, the microphone windscreen should
just touch the lips at the corner of the mouth (to avoid pop noise.)
9
User's Manual
User's Manual
Mounting the Headset Microphone Type 4035
Fig. 6. Mounting the Headset Microphone Type 4035.
10