DPA 4035 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikrofon DPA 4035. DPA 4035 9 stron. Headset microphone; compact omnidirectional microphones 12mm

Drukuj stronę

Specifications:

Cartridge type:

Pre-polarized condenser

Brüel & Kjær Type MM0043

Principle of operation: Pressure

Power Supply: Phantom P48

Frequency range:

On-axis: 20Hz - 40kHz ±2dB

Phase response:

Phase matching between any two

microphones: ±5° (50 Hz to 20kHz)

Directional characteristics:

Omnidirectional

Sensitivity:

Nominally 8mV/Pa (at 250Hz)

Equivalent noise level A-weighted:

Typ. 24dB(A) re. 20µPa

Equivalent noise level CCIR 468-1:

Typ. 36dB (max. 38dB)

Max SPL before clipping occurs:

144dB SPL peak

Total Harmonic Distortion:

130 dB SPL peak (<0.5% THD)

Preamplifier:

Output impedance: <300 Ohm

Cable drive capability: Up to 100m

Difference frequency distortion:

(DF2, DF3, Df = 80Hz) <1%

at 136dB SPL peak

User's Manual

Full Specifications

Temperature coefficient:

-0,025dB/°C at 25°C, 1013 hPa, 250Hz

Static pressure coefficient:

-0,002dB/hPa at 25°C, 1013 hPa, 250Hz

Influence of vibration:

69dB equivalent SPL for m/s2 in

direction of greatest sensitivity

Influence of magnetic field:

45dB equivalent SPL for 80A/m, 50Hz

in direction of greatest sensitivity

Operating temperature range:

-10 to +70°C (+14 to 158°F)

Dimensions:

Microphone length:

4035: 20mm (260mm overall length

ex. cable)

4033: 40mm

4036: 21mm

4037: 21mm

Microphone diameter: 12mm

Capsule diameter: 12mm

Weight:

4035: 27.7g (microphone)

4033: 14g (without cable)

4036: 10g (without cable)

4037: 10g (without cable)

User's Manual

Full Specifications

Accessories Included:

Miniature Holders

DMM0001 Miniature Clip (Only 4036)

Windscreens

DUA0030 Small Windscreen for

Ø12mm Microphone

Accessories

Available for Type 4035:

Windscreens

UA0658 Windscreen for

Ø12mm Microphone

Accessories Available

for Type 4033, 4036 and 4037:

Microphone Holders

for Musical Instruments

CH4000

Microphone Holder

for Cello

GM4000

Gooseneck Mount, 19mm

SAX4000 Microphone Holder

for Saxophone and Horn

VH4000

Microphone Holder

for Violin and Bass

Shock Mounts

CSM4000 Compact Shock Mount

TSM4000 Table Shock Mount

Shock Mount Rubbers

DDS0012 Rubber Mount

11-13mm, Extra Soft

Floor & Table Stands

CAP0400 Compact Active Pole,

400mm

CAP0750 Compact Active Pole,

750mm

CAP1250 Compact Active Pole,

1250mm

DUA0100 Stand Extension, 100mm

DUA0250 Floor Base, Ø250mm

DUA0500 Stand Extension, 500mm

FGS4000 Flamingo Grand,

Single Stand

FGT4000

Flamingo Grand Twin,

Double Stand

FJS4000

Flamingo Junior,

Short Single Stand

MB4000

Magnet Base

SJD4000 Swivel Joint, Double

SJS4000 Swivel Joint, Single

TB4000

Table Base