DPA d:fine Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System mikrofonowy DPA d:fine. DPA d:fine 4 stron. Headset & earset microphones
Również dla DPA d:fine: Podręcznik użytkownika (4 strony), Podręcznik (13 strony)

Drukuj stronę

Omnidirectional characteristics

• The microphone is sensitive to sound from all directions.

• The sound remains more or less the same regardless of

the distance between the sound source and the micro-

phone. Good choice for untrained personnel.

• The positioning of microphones with omnidirectional

characteristics is less critical than with directional.

• An omnidirectional microphone is generally not very sensi-

tive to wind, breathing and handling noises.

Directional characteristics

• Rejects background noise and creates higher separation.

• The microphone is most sensitive to sound on the side of

the chevron.

• The positioning of microphones with directional characteristics is es-

sential, as the low frequency level will change according to the distance

to the mouth. Choose a distance which yields the desired amount of

bass.

• Care should be taken to protect against wind and pop noise.

The directional characteristics of the microphone is indicated on the

microphone head with for omnidirectional and for directional.

This marking should always point towards the mouth.

How to mount DPA d:fine

Headset microphone

Open the spring hook lightly, first place the slide behind your earlobe

and let go of the spring hook over your ear.

How to adjust microphone boom & cable

Position the microphone properly

by pulling or pushing the boom

along the slide.

Switch between left and right ear

wearing style simply by rotating the

microphone boom. Hold on to

the earhook while gently turning

the boom.

Adjust the microphone boom to

follow the shape of your face by

gently bending the soft steel on

the cable hanger.

Adjust the angle of the cable run,

also by gently bending the soft

steel (see arrows). Position the

cable as shown on the picture

for securing the position of the

microphone.

Service point for exchange of cables or booms

The DPA d:fine

microphone offers exchange of

cables or microphone booms.

Simply locate the service access

point, pull back the small protec-

tion cap and gently pull the boom

away from the cable hanger.

Protection grid

A protection grid is mounted over the microphone head. If clogged with

dirt or make-up, gently remove it and clean it with water. Always leave

the protection grid on the microphone, as it protects the inner grid and

offers protection against wind and breathing noise. The protection grid

is replaceable.

Windscreens

The enclosed windscreens offer additional protection against wind and

pop noise. Gently draw the windscreen over the microphone head. For

even better protection, bigger windscreens are available.

Accessories (see more at www.dpamicrophones.com)

Grids and windscreens

Cables and adapters

Microphone booms and earhooks

Sweat stop

Headset

DPA d:fine

Headset microphone is equipped with a transparent sweat

stop around the microphone boom to prevent sweat running along the

microphone boom to the microphone head.