Daihen MWP-18 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Latarka Daihen MWP-18. Daihen MWP-18 19 stron. Tig welding torch

This instruction manual describes the operation and maintenance of TIG Welding Torch

MWP-18. Read and understand the entire contents of this manual before use to be able

to handle the torch properly. Before operating the torch, be sure to read OPERATION.

Note 1: The contents of this instruction manual are subject to change without prior notice.

2: We do our best not to have any misprint or error in this manual. However, when we do

have them, we are not responsible for any problems or consequences arisen from them.

3: We prohibit whole or a part of this manual to be copied without permission.

Torch MWP-18 is for automatic TIG welding, thus used for welding with AC (a high-frequency

superimposition) or DC (Mainly a negative electrode).

Specifications are described in Table 1.

Max.

applicable

current

Materials of electrode

Note: Options need to be purchased for the electrode sizes in parenthesis.

Table 1 Specifications (See Figure 1)

Type

Welding method

DC (positive

electrode)

Rated duty cycle

Electrode in use

Cooling method

Torch shape

Cable length

Operation

MWP-18

TIG welding

300A

260A

100%

( φ 1.0) ( φ 1.6) ( φ 2.4) φ 3.2

Ceriated tungsten

(Thoriated tungsten, pure tungsten)

Water cooling

Pencil shape

6 m

– 1 –