Amprobe BT-250 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Amprobe BT-250. Amprobe BT-250 10 stron. Breaker tracer
Drukuj stronę
SPECIFICATIONS
Operating & Detection
Voltage for Transmitter
Operating Frequency
Storage Temperature
Operating Temperature
Sensitivity Adjustment
Power Supply
Transmitter Polarity
Humidity
Environmental
Conditions
Caution
BATTERY REPLACEMENT
Power is supplied by one 9 V alkaline battery (Receiver).
The Identification Arrow LED on the Receiver will not turn ON when
replacement is needed. To replace the battery, remove the screw from the back
of the meter and slide the battery door outward. Remove the battery from
case bottom and replace it with a fresh 9 V alkaline battery.
.800.561.8187
BT-120
90-120 VAC,
Not to exceed ±10%
(inclusive in rating)
50 Hz to 60 Hz
32 °F to 104 °F (0 °C to 40 °C)
32 °F to 104 °F (0 °C to 40 °C)
Automatic
9 V alkaline battery (Receiver)
Automatic
50% RH (non condensing)
Indoor use, altitudes up to 2000 m,
Pollution Degree 1 or 2, Installation Category II
BT-VLA cord assembly to be used with Transmitter
only according to instructions.
6
www.
.com
BT-250
90-250 VAC,
Not to exceed ±10%
(inclusive in rating)
40 Hz to 70 Hz
Slide battery
door outward
Remove screw