Comdial 22 Series Podręcznik użytkownika

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria telefoniczne Comdial 22 Series. Comdial 22 Series 2 stron. Executech 32-button adjunct feature module

Drukuj stronę
l
Press specific telephone
lineckey for line.
-or-
e Press
1
m 4 on the telephone dial pad for line
group.
-or-
e Press 0 on the telephone
dial pad for no
selection. (When 0 is stored and automatic
dialing is used, system will pick line as-
signed to telephone or last line used.)
. Dial the number sequence to be stored from
the telephone
dial pad (up to 16 digits).
l
To store
a pause,
press
HOLD
on
telephone.
. To store
a flash,
press
RECALL
on
telephone.
To store another number for automatic
dialing,
l
Press
SAVE
on telephone.
. Press next Module key (or press
HOLD
plus
Module key if DSS/BLF is programmed).
l
Select
line, group or none as described
above.
e Dial number sequence as described above.
. Repeat this procedure for each desired key.
HINT:
Store often-used,
host system PBX or
CENTREX feature access codes at Module key
locations.
This will provide one-key access to
those host system features.
To end programming,
l
Press
MONITOR
on telephone.
To dial numbers automatically,
0 Press desired Module key.
-or-
. If desired
key is also programmed
for
DSS/BLF operation,
e
Press
HOLD
on telephone
and then press
desired key on Module.
. When
party
answers,
lift handset
of
telephone.
OFF-HOOK
VOICE ANNOUNCE
AND HANDSFREE
ANSWER-
BACK
The Adjunct Feature Module can receive a voice
signalled intercom call (voice announce) at the
same time that the paired station is active on
another call. You can answer the voice sig-
nalled intercom call in a handsfree manner
without interrupting your currently active call.
To answer voice announce in a
COMDIAL
Made rJ&t in the USA
handsfree manner,
. Hear voice signalling (voice announce)
over
Executech
Module speaker,
l
Respond
to voice announce
by speaking
toward Module (handsfree answerback).
32-Button
Adjunct
Feature Module
Adjust the audio level of the voice signalling with
the speaker volume control located on the right
(With Voice Announce Capability)
side of the Module.
USER GUIDE
For use with following hybrid/key system models:
l
1432 Series
0 22xx
Series
COMDWL
Charlottesville,
VA 22906
GCA 70-096.01
II
June 1988
~@w&i0~.