Carcam GS5000 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla DVR Carcam GS5000. Carcam GS5000 5 stron. Full hd 1080p car dvr

Motion Dection:

ON/OFF

MD SENS: Set sensitivity of motion detection, from 1 to 8

Revise the following content in the Menu mode:

Language: Set Language

Date/Time: Up/Down button to operate, press OK for next set

TV Output: NTSC/PAL

Format: Format the TF card

Reset system: set the system parameter as the default value

Auto off: set idle time to power off the device

Light source frequency: choose the frequency of electric wire, in the event of selecting the wrong

frequency, the horizontal lines interruption will show on the image

Auto LCD off Time: set the time auto turn off the LCD screen; press any key to wake up the LCD

screen

G-Sensor: G-Sensor is used to test if the car has any crash. If so, it will automatically lock the file,

there will be a lock mark at the right corner of file. In the case, the video won't be erased by loop

recording. There are nine settings of this sensitivity of the G-Sensor: off/1/2/3/4/5/6/7/8.Off closes

the G-Sensor function. 1 is the lowest sensitivity and 7 is the highest.(To prevent too many locked

files in the card which may affect normal loop recording, the max total size of the locked file is

1G)

GPS: ON/OFF GPS Function

Firmware Version: Check the Firmware Code of the device

Warning Notice

If the device has problem with the correct operation, please refer to the solution as below:

Cannot take pictures or video clips

Check the TF card whether has sufficient space

Stop recording half way

Please check whether your TF card support high-speed transmission for SDHC (marked with

C4 or C6), suggest format the card before using

File Error in playback mode